Honeycomb aluminum panel materials usually use high-grade aluminum alloy plates of models 3003, 5005, etc. as the base material. The decorative surface adopts pre roller coating process, and the coating is polyester or fluorocarbon paint. Due to the continuous roller coating process used for fluorocarbon roller coated aluminum panels, the aluminum plate coating is completed in one go, ensuring that the product has no color difference, good coating smoothness, and reliable quality. Honeycomb aluminum panels have high flatness, and the back of the aluminum panel does not require reinforcing ribs. Its strength and stiffness are due to the single-layer aluminum veneer. Honeycomb aluminum panels have been widely used in commercial applications due to their excellent performance. What are the installation methods for aluminum honeycomb panels?
1. Lug type installation
The lifting ear installation method refers to the separation of the lifting ear and honeycomb aluminum plate. After the lifting ear is processed separately, it is connected to the adhesive seam position of the honeycomb aluminum plate. The suitable width of the adhesive seam is ≥ 12mm. This installation method is simple to process and convenient to install.
2. Flanging installation
This installation method involves processing honeycomb aluminum panels with installation flanges. The installation only needs to be connected to the keel and adhesive joint according to the position, and the suitable adhesive joint width is ≥ 10mm. This method is convenient for installation, but the processing is slightly complex and not suitable for modeling curtain wall aluminum panels.
3. Hook up lifting installation
Hook up lifting is mainly used for ceiling installation without edge height difference or special shape, and the overall stability of the ceiling after installation. This method is not recommended for honeycomb aluminum panels with larger spokes and thinner panels.
4. Z-shaped pendant lifting and installation
The Z-shaped pendant lifting is widely used, easy to process, easy to install, and can be repaired by personnel after lifting, making it suitable for any type of ceiling installation.
5. U-shaped pendant type
Use a method of hanging directly from below to the keel and then fixing it to the keel within human reach. This lifting method solves the problem of a common Z-shaped pendant with a wider spoke and a lower keel that cannot be installed by humans.